1. Industrial aluminum profile temperature setting and control: usually in the processing of industrial aluminum profile temperature and surface temperature there is a specific error, set the table temperature should be set according to the actual temperature of the furnace, and pay close attention to the temperature fluctuations;
2. Aging insulation of industrial aluminum profiles: aging should be carried out in strict accordance with the process requirements, and the insulation time should be appropriate to prevent insufficient hardness caused by under-aging or over-aging. Billet frame, furnace;
3. Industrial aluminum extrusion frame can not be too dense, there should be a gap between the material and the material, industrial aluminum profile, especially unventilated small material, thick material interval is more large, pipe material and small material, sheet material together with a box, pipe material is put below this is conducive to aging circulation air supply;
4. Before loading industrial aluminum profiles into the furnace, other special alloys and ordinary alloys should be separately loaded into the furnace for aging. Because of the production reasons, it is necessary to use the process of special alloys for aging.
