| 1. Brand name: Steel Fume Hood |
Shell:1.2mm cold rolled/galvanized steel, automatic molding; the surface is acid cleaned, phosphating washed and sprayed with epoxy powder, bright and clean, achieving good performance of anti-acid and alkali.
Rack of the upper supporter is made of 2.0mm cold-rolled welded square steel, the surface is acid cleaned, phosphating washed and sprayed with epoxy powder.
Specifications:1200x850x2350mm, 1500x850x2350mm, 1800x850x2350mm.
| 2. Model NO. ASLB 05 |
| 3. Application: Lab Workshop |
| 4. Product Specification: |
Lined plate:6mm thick,acid and alkali resistance,its structure can release pressure towards explosion.
Deflector:diversion function,same material as lined plate,installation location and angle can make the exhaust evenly distributed,no dead ends,under the standard conditions,the diversion board side and the bottom outlet exhaust volume ratio of about 50(± 10%)to ensure that the different proportion of the gas can be effectively ruled out;with angle adjustable design can increase middle,under outlet exhaust volume ratio to 80 % and above,would be more effective emission of different densities gases,adapt to different experimental needs.
Exhaust Fume Hood
Gas gathering wind cover:polymer plastic molded,the bottom of the entrance of the rectangular opening is square,the cover has good gas
gathering angle and roundness,get a average distribution and low pressure loss.
Windows:5mm safety glass (under hydrofluoric acid environment,replace with plexi glass plate).
Lighting:full face design(with vents),and the bottom with 5mm safety glass,included two 220V,30W fluorescent.
The cable:PVC-coated steel cable.
Power:220V10A laboratory sockets,can match a variety of instrument plug.
| 5. Modular design: |
Steel Chemical Fume Hood
All Steel Fume Hood
Steel Lab Fume Hood
Ducted Fume Hood
Standard Fume Hood
Laboratory Fume Cupboards
Fume Hood metal
School Lab Fume Hood
 |  | |
Laboratory Fume Extraction Hoods | ||
 |  | |
Cheap Laboratory Fume Hood | ||
 |  | |
Ductless Fume Hood | ||
Industrial Fume Hood
| 6. FAQ |
Q1. What can I do if I received the broken WORKBENCH ?
A1. First take a photo and send to us, after we check and confirm is our products’ problem, we will send the products for free.
Q2. Could I get a sample to check your quality? How could I get the sample?
A2. We could offer WORKBENCH component to check the quality, this is free; you also could choose the whole set to check the quality, we will discuss the sample cost.
Hot Tags: steel fume hood, China, suppliers, manufacturers, factory, customize, cheap, low price
